Tavor® X95 .300 AAC Blackout Conversion Kit

← Go Back

The Tavor® X95 is uniquely convertible to .300 AAC Blackout.

The caliber conversion kit includes:

  • Tavor® X95 .300 Blackout 16.5″ barrel – cold hammer forged, CrMoV, chrome lined, 1:8″ twist
  • A2 flash suppressor
  • Right hand bolt for a right handed shooter or a left hand bolt for a left handed shooter
  • Recoil mechanism
  • A full-length flattop Picatinny rail with gas regulator
  • Deflector frame (for conversion from 9mm to .300 AAC Blackout)
  • Tavor® barrel wrench
  • One Black Magpul PMAG® Gen M3 30 Round with Window

Please follow the following steps in the included Tavor® X95 manual (P/N: 08011021600 Rev.: C or D) in order to install your .300 Blackout kit:

Section 14.1.3 Sear Mechanism
Section 14.1.4 Recoil Mechanism
Section 14.1.6 Foregrip Group
Section 14.1.7 Cocking Bar Assembly
Section 14.1.8 Barrel-Rail Group

For .300 Blackout conversion from 5.56 NATO:
1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector

For .300 Blackout conversion from 9mm:
1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector and deflector frame
2. Follow section 14.2.5 Magazine Adapter Assembly to uninstall the 9mm magazine adapter assembly

Removing your barrel without completing Sections 14.1.3 – 14.1.7 first will damage your barrel.

Warning: You must use the new barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders. 


Warning:

Magazines with capacity greater than 10 rounds may not be legal where you reside. Please check your local laws and click here for our Magazine Shipping Policy to see if we can ship to you.

 
Clear

$899.00


If you are using any other rev. level of Tavor® X95 manual please follow the following steps in order to install your .300 Blackout kit:

Section 14.1.2 Sear Mechanism
Section 14.1.3 Recoil Mechanism
Section 14.1.5 Foregrip Group
Section 14.1.6 Cocking Bar Assembly
Section 14.1.7 Barrel-Rail Group

For .300 Blackout conversion from 5.56 NATO:
1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector

For .300 Blackout conversion from 9mm:
1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector and deflector frame
2. Follow section 14.2.5 Magazine Adapter Assembly to uninstall the 9mm magazine adapter assembly


Export Notice:

This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.

As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.


WARNING:

 Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Weight lbs
Left/Right Hand Bolt

Left Hand, Right Hand