Tavor® X95 5.56 NATO 13″SBR Barrel & Bolt Kit

← Go Back

If you have purchases the SBR Aluminum Flattop Rail and the SBR Short Foregrip previously this kit can be used. If you have not purchased the SBR Aluminum Flattop Rail and the SBR Short Foregrip you will need the full SBR Conversion Kit.

This 13″ SBR barrel and bolt kit comes headspaced from the factory and should be used together. Be sure to replace your bolt when replacing your barrel. Please check local, state and federal laws before assembling your Tavor® X95™ with your new barrel & bolt.

Includes:

  • 13″ 5.56 NATO barrel – cold hammer forged, CrMoV, chrome lined, 1:7″ twist with attached cocking bar band
  • A2 flash suppressor
  • Right hand bolt for a right handed shooter or a left hand bolt for a left handed shooter
  • Barrel wrench

Can be used with the SBR Aluminum Flattop Rail and the Short Foregrip for a OAL of 23.8″
If using the thin buttplate the OAL will be 22.8″

Please follow the following steps in the Tavor® X95 manual in order to install your SBR kit: Section 14.1.3, 14.1.4, 14.2.1.1, 14.1.6, 14.1.7, 14.1.8, 14.2.1.1

Removing your barrel without completing the above sections first will damage your barrel.

Warning: You must use the new barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders.

 
Clear

$449.99


NFA Warning:

Please note installation of this 13″ barrel will change your rifle to a short barreled rifle (SBR) subject to all the requirements of the National Firearms Act (NFA) for SBR’s.

It is your responsibility to ensure you remain in compliance with all local, state and federal laws along with all NFA rules/regulations in regards to installation and use of the Tavor® X95 13″ barrel.


Export Notice:

This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.

As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.


WARNING:

 Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Weight lbs
Left/Right Hand Bolt

Left Hand, Right Hand