The Galil® ACE Stabilizing Brace is produced for IWI US, Inc. by SB Tactical LLC, designers and manufactures of the original SB15 and SB47 Pistol Stabilizing Braces. Originally designed as a means for persons with a limited mobility to operate and fire the AR-15 pistol, the custom adaption of the Stabilizing Brace to the Galil® ACE takes the application of large frame pistol control and stabilization to a new level. With the brace in the folded position, storage space required in your safe or range bag is minimized.
For GAP39 II and GAP51 – To remove the body back cover: use a 4 mm punch to remove the pin or pins. To attach brace: use a 3/16″ roll pin punch and a hammer to gently tap one or two roll pins in. You may find it easier to crush the end of the roll pin before inserting it.
For GAP556 – To remove the body back cover: use a 4 mm punch to remove a pin from both sides of the bottom hole on the bottom back cover and use a 4 mm punch to remove the pin from the top hole. To attach the brace: use a 3/16″roll pin punch and a hammer to gently tap a roll pin in the top hole and a roll pin in the bottom hole. You may find it easier to crush the end of the roll pin before inserting it.
Hinge components made in Israel, stabilizing brace made in the USA
This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.
As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.
Cancer and Reproductive Harm – www.P65Warnings.ca.gov