This barrel and right hand bolt kit comes headspaced from the factory and should be used together. Be sure to replace your bolt when replacing your barrel. Please check your local and state laws before assembling your Tavor® SAR with your new barrel & bolt kit.
Please follow the following steps in your Tavor® SAR manual in order to install your kit:
Section 15.1 Primary Disassembly/Reassembly
Section 15.2 Removal/Installation of Sear Mechanism
Section 15.4 Secondary Disassembly/Reassembly
Section 15.5 Removal/Installation of Flattop Rail
Section 15.6 Removal/Installation of Front Swivel and Lock
Section 15.7 Removal/Installation of Foregrip Group
Section 15.8 Removal/Installation of Cocking Group
Section 15.10 Removal/Installation of Barrel Group
Removing your barrel without completing Sections 15.1 – 15.10 first will damage your barrel.
Warning: You must use the new barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders.
If you have the Tavor® SAR manual P/N 08011011300 in order to install your kit follow:
Section 14.1.1 Quick-Detach Sling Swivels
Section 14.1.3 Sear Mechanism
Section 14.1.4 Recoil Mechanism
Section 14.1.5 Flattop Rail Assembly
Section 14.1.6 Swivel Sleeve and Swivel Lock
Section 14.1.7 Foregrip Group
Section 14.1.8 Cocking Group
Section 14.1.9 Barrel Group
Section 14.2.1 Recoil Mechanism
Removing your barrel without completing Sections 14.1.1 – 14.1.9 first will damage your barrel.
This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.
As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.