A SBR conversion kit for your Tavor X95 in 5.56 NATO.
Please follow the following steps in the Tavor X95 manual in order to install your SBR kit: Section 14.1.3, 14.1.4, 184.108.40.206, 14.1.6, 14.1.7, 14.1.8, 220.127.116.11 (You will use your current recoil mechanism but replace the bolt with the provided bolt.)
Removing your barrel without completing sections 14.1.3 – 14.1.7 first will damage your barrel.
With included parts and your butt pad the OAL: 23.8″
With the thin buttplate the OAL: 22.8”
Warning: You must use the 13″ barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders.
Please note installation of this kit will change your rifle to a short barreled rifle (SBR) subject to all the requirements of the National Firearms Act (NFA) for SBR’s.
It is your responsibility to ensure you remain in compliance with all local, state and federal laws along with all NFA rules/regulations in regards to installation and use of the Tavor® X95 SBR conversion kit.
This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.
As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Black, Flat Dark Earth