Tavor X95 5.56 NATO 18.5″ Barrel & Bolt Kit

BLACK FRIDAY SALE 15% OFF SIDTWIDE 11/30-12/02

This 18.5″ barrel bolt kit comes headspaced from the factory and should be used together. Be sure to replace your bolt when replacing your barrel. Please check your local and state laws before assembling your Tavor X95 with your new barrel & bolt kit.

This barrel comes with a barrel band and must be used with the barrel band cocking rod that can be found here.

Included:

Tavor X95 5.56 NATO 18.5″ barrel – cold hammer forged, CrMoV, chrome lined, 1:7″ twist
A2 flash suppressor
Tavor 5.56 NATO right or left hand bolt
Tavor barrel wrench

Please follow the following steps in your Tavor X95 manual (Rev 00) in order to install your barrel & bolt kit:

Section 14.1.2 Sear Mechanism

Section 14.1.3 Recoil Mechanism

Section 14.1.5 Foregrip Assembly

Section 14.1.6 Cocking Bar Assembly

Section 14.1.7 Barrel-Rail Group

Section 14.2.1.1 Gas-operated Recoil Mechanism

Section 14.2.2 Barrel-Rail Group

Removing your barrel without completing the above sections first will damage your barrel.

Warning: You must use the new barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders.

If you are using the P/N: 08011021600 Rev.: C or D Tavor® X95 manual please follow the following steps in order to install your barrel & bolt kit:

Section 14.1.3 Sear Mechanism

Section 14.1.4 Recoil Mechanism

Section 14.1.6 Foregrip Group

Section 14.1.7 Cocking Bar Assembly

Section 14.1.8 Barrel-Rail Group

Section 14.2.1.1 Gas-operated Recoil Mechanism

Section 14.2.2 Barrel-Rail Group

Removing your barrel without completing the above sections first will damage your barrel.

Note: this item is only compatible with a 18.5" (non-restricted state) tavor x95 and may require a signature when delivered

$599.99

Left/Right Hand Bolt

Clear

Description

Export Notice:

This is an item controlled for export by the International Traffic in Arms Regulations (ITAR). These controls take the form of export regulations and export license requirements.

As part of the express consideration provided for receipt of IWI US’s goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by IWI US in violation of U.S. law is prohibited. Customers acquiring ITAR goods, technical data and/or services from IWI US shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws.

WARNING:

Cancer and Reproductive Harm – www.P65Warnings.ca.gov